XUM400 Upright Metallurgical Microscope for Opaque Specimens

Technical features

• Model XUM400 upright metallurgical microscope for opaque specimen inspection
• Eyepiece: Wide field WF10X (Φ18mm) standard; optional WF16X (Φ11mm) and dividing 10X (Φ18mm) 0.1mm/Div
• Objectives: PL 5X/0.12, PL L10X/0.25, PL L20X/0.40, PL L40X/0.60, PL L80X/0.80 (all long working distance, no cover glass)
• Trinocular eyepiece tube with 30° inclination, analyzer with field diaphragm for switching
• Vertical illumination: 6V 20W halogen lamp, brightness control, field diaphragm, aperture diaphragm, polarizer, (Y,B,G) filter, frosted filter
• Coaxial coarse and fine focus system with tension adjustment and up stop; minimum fine focus division: 0.7μm
• Nosepiece: Quintuple, frontward ball bearing inner locating
• Stage: Three-layer mechanical, size 250mm × 230mm, moving range 154mm × 154mm

Who it is for

• Metallurgical and materials testing labs
• Electronics manufacturers conducting PCB and component surface inspection
• Quality assurance teams in industrial production lines
• Distributors supplying metallurgical microscopes for industrial and research use

Specifications

Use guide

• Select standard WF10X eyepiece or optional WF16X/dividing 10X based on field of view and measurement needs
• Choose objectives based on required magnification and working distance (e.g., PL L80X/0.80 for high magnification, PL 5X/0.12 for wide field)
• Use long working distance objectives (no cover glass) for inspecting thick or uneven specimens
• Add CCD adapter or camera when digital image capture is required
• Use photo unit with 10X eyepiece for photographing samples with high resolution