XSZ6745 0.3X Auxiliary Barlow Lens for Stereo Microscope

XSZ6745 is a 0.3X auxiliary Barlow lens designed for stereo microscopes to extend the working distance and reduce magnification for broader field of view during inspection tasks. It fits standard 1X objective paths and is used in electronics, medical, and industrial bench work where low magnification and increased clearance are required.

Extends working distance by reducing effective magnification when used with 1X objective paths
Provides wider field of view at lower magnification for large or tall components
Simple mechanical fit to standard stereo microscope objective mounts without optical alignment adjustment
Enables inspection of bulky or high-profile parts under the lens without obstruction

Request A Quote +86-15195807515

Technical features

Magnification factor: 0.3X (reduces effective magnification by 70%)
Designed for use with standard 1X objective paths on stereo microscopes
Mechanical fit compatible with common 1X objective mounts
No optical adjustment required during installation
Clear optical path with minimal image distortion at low magnification

Who it is for

Electronics manufacturers using stereo microscopes for PCB and SMT inspection
Laboratories performing bench-level inspection with stereo microscopes
Distributors adding accessories to microscope kits for industrial or clinical use

Specifications

Model	XSZ6745
Magnification	0.3X
Optical Design	Single-element Barlow lens

Use guide

Install on the standard 1X objective path of a stereo microscope
Use when working with tall components or when a wider field of view is needed
Do not use with objectives other than 1X; may cause misfocus or vignetting

FAQ

What does 0.3X mean for magnification?

It reduces the effective magnification by 70%, allowing for a wider field of view and longer working distance.

Can I use this with any stereo microscope?

Yes, as long as the microscope has a standard 1X objective path with compatible mechanical mounting.

Does this lens affect image quality?

It is a single-element lens with minimal distortion; suitable for general inspection tasks.

Is optical alignment required after installation?

No. The lens is designed for direct mechanical fit with no alignment needed.

What is the working distance improvement?

With a 1X objective, the working distance increases proportionally to the magnification reduction (0.3X). Exact distance depends on the base microscope model.