- Home
- Products
- Biological Microscope
- Zoom Stereo Microscope
- Fluorescence Microscope
- Metallurgical Microscope
- Polarizing Microscope
- Video Digtal Microscope
- Microscope Camera
- Astronomy Accessory
- Microscope Accessory
- Magnifier Magnifying
- About Us
- Contact Us
MAX TE-Cooling M52/C-mount USB3.0 CMOS Microscope Camera
MAX camera adopts SONY Exmor or GSENSE with big pixel size or full-frame CMOS sensor as the image-picking device and USB3.0 is used as the transfer interface to increase the frame rate.
With the two-stage peltier cooling sensor chip to -40°C below ambient temperature. This will greatly increase the signal to noise ratio and decrease the image noise. Smart structure is designed to assure the heat radiation efficiency and avoid the moisture problem. Electric fan is used to increase the heat radiation speed.
MAX comes with advanced video & image processing application ToupView; Providing Windows/Linux/OSX multiple platform SDK; Native C/C++, C#/VB.NET, DirectShow, Twain Control API;
The MAX can be widely used in low light environment and microscope fluorescence image capture and analysis, as well as the astronomy deep sky application.
MTR3CCD C-mount USB3.0 CCD Digital Video Microscope Camera
MTR3CCD camera adopts Sony Exview HAD CCD II sensor as the image-picking device with two-stage peltier cooling sensor chip to -40 degree below ambient temperature. This will greatly increase the signal to noise ratio and decrease the image noise. Smart structure is designed to assure the heat radiation efficiency and avoid the moisture problem. Electric fan is used to increase the heat radiation speed.
USB3.0 is used as the data transfer interface to increase the frame rate.
MTR3CCD comes with advanced video & image processing application ToupView; Providing Windows/Linux/OSX multiple platform SDK; Native C/C++, C#/VB.NET, DirectShow, Twain Control API;
The MTR3CCD can be widely used in low light environment and microscope fluorescence image capture and analysis, as well as the astronomy deep sky application.
The basic characteristic of MTR3CCD can be summarized as follows:
- Standard C-Mount camera with SONY ExView HAD CCD II sensors from4M to 12M;
- Two-stage TE-cooling with controllable electric fan;
- Sensor chip cooling up to 40°C below ambient temperature;
- Working temperature can be regulated to specified temperature in 5 minutes;
- Smart structure to assure the heat radiation efficiency and avoid the moisture problem;
- IR-CUT/AR coated windows;
- Up to 1-hour long time exposure;
- 0 5Gbit/second interface ensuring high speed data transmission;
- Ultra-FineTM color engine with perfect color reproduction capability;
- With advanced video & image processing application ToupView;
- Support both video and trigger modes;
- Providing Windows/Linux/Mac OS multiple platforms SDK;
- Native C/C++, C#/VB.NET, DirectShow, Twain control API;
U3CCD C-mount USB3.0 CCD Digital Video Microscope Camera
U3CCD is an ExView HAD CCD series camera. It adopts Sony ExView HAD CCD sensor as the image-picking device. Sony ExView HAD CCD is a CCD that drastically improves light efficiency by including near infrared light region as a basic structure of HAD (Hole-Accumulation-Diode) sensor. ToupTek uses EXCCD for simplicity. USB3.0 is used as the data transfer interface.
U3CCD hardware resolutions range from 1.4M to 12M and come with the integrated CNC aluminum alloy compact housing.
U3CCD comes with advanced video & image processing application ToupView; Providing Windows/Linux/ OSX multiple platforms SDK; Native C/C++, C#/VB.NET, DirectShow, Twain Control API;
The U3CCD can be widely used in bright field light environment and microscope image capture and analysis with higher frame rate.
The U3CCD characteristic is as follows:
- Standard C-Mount camera with SONY ExView HAD CCD II sensors from 1.4M ~12M;
- IR-CUT Coated Windows
- Up to 1000s long time exposure;
- 0 5Gbit/second interface ensuring high speed data transmission;
- Ultra-FineTM color engine with perfect color reproduction capability;
- With advanced video & image processing application ToupView;
- Providing Windows/Linux/Mac OS multiple platforms SDK;
- Native C/C++, C#/VB.NET, DirectShow, Twain Control API;
0.35X 0.5X 0.63X 0.8X 1X 1.2X Adapter Compatiable for Olympus Microscope
Convert the Olympus trinocular microscope phototube/head/port (have standard 35 mm outer diameter for the insertion end to phototube) to traditional C-Mount type(25.4 mm or 1 inch diameter with 32 threads per inch);
(Note: U-TV1.2XT2 is for M42-Mount)
With different built-in reduction lens (1X, 0.63X, 0.5X, 0.35X) for achieving better field of view from microscope trinocular head(suitable for 1”, 2/3”, 1/1.8”, 1/2”, 1/2.5”, 1/3” or 1/4” inch CCD or CMOS sensor chips);
Can be installed in UIS trinocular tube such as : BX series, BX2 series,CX series, CX2 series, MX series;
Build of material: anodized aluminum;
Telecentric optics with low light deficiency;
Parfocal with different microscope objective lenses;
Diffraction limited MTF;
Aperture totally coupled with UIS microscope objective’s exit pupil;
0.35X 0.5X 0.65X 0.8X 1X 1.2X Adapter Compatiable for P95 Zeiss Microscope
P95 Series Zeiss Characteristic
- Convert the Zeiss trinocular microscope phototube/head/port (have standard ISO 30 mm, 1.18 inch inner diameter for the insertion end to phototube) to traditional C-Mount type(25.4 mm or 1 inch diameter with 32 threads per inch), T2 mount type(M42x0.75 mm metric thread) or M52 mount type(M52x0.75mm metric thread);
- With different built-in reduction lens (2.25X, 1.5X,1.2X,1X, 0.8X,0.63X, 0.5X, 0.35X) for achieving better field of view from microscope trinocular head(suitable for 2.7”, 1.8”, 4/3”, 1”, 2/3”, 1/1.8”, 1/2”, 1/2.5”, 1/3” or 1/4” inch CCD or CMOS sensor chips);
- Can be installed in Zeiss UIS trinocular tube such as:Zeiss PrimoStar series and Zeiss Primo vert series
- Build of material: anodized aluminum;
- Telecentric optics with low light deficiency;
- Parfocal with different microscope objective lenses;
- Diffraction limited MTF;
- Aperture totally coupled with UIS microscope objective’s exit pupil;
- The profile of one end of the adapter connecting to the microscope:
0.5X 0.63X 0.8X 1X 1.2X Adapter Compatiable for 60N Zeiss Microscope
60N-C, 60N-T2 60N-M52 Series TV Adapter Characteristic for Zeiss Microscope
- Convert the Zeiss trinocular microscope phototube/head/port (have standard M52x1mm outer diameter for the insertion end to phototube) to traditional C-Mount type(25.4 mm or 1 inch diameter with 32 threads per inch), T2 mount type(M42x0.75 mm metric thread) or M52 mount type(M52x0.75mm metric thread);
- With different built-in reduction lens (2.25X, 1.5X,1.2X,1X, 0.8X,0.63X, 0.5X, 0.35X) for achieving better field of view from microscope trinocular head(suitable for 2.7”, 1.8”, 4/3”, 1”, 2/3”, 1/1.8”, 1/2”, 1/2.5”, 1/3” or 1/4” inch CCD or CMOS sensor chips);
- Can be installed in Zeiss UIS trinocular tube such as Axio series microscope;
- Build of material: anodized aluminum;
- Telecentric optics with low light deficiency;
- Parfocal with different microscope objective lenses;
- Diffraction limited MTF;
- Aperture totally coupled with UIS microscope objective’s exit pupil;
- The profile of one end of the adapter connecting to the microscope:
0.35X 0.55X 0.7X 0.8X 1X 1.2X Adapter Compatiable for Nikon Microscope
- Convert the NIKON trinocular microscope phototube/head/port (have standard 38 mm, 1.50-inch inner diameter for the insertion end to phototube) to traditional C-Mount type(25.4 mm or 1 inch diameter with 32 threads per inch), T2 mount type(M42x0.75 mm metric thread) or M52 mount type(M52x0.75mm metric thread);
- With different built-in reduction lens (2.25X, 1.5X,1.2X,1X, 0.8X,0.63X, 0.5X, 0.35X) for achieving better field of view from microscope trinocular head(suitable for 2.7”, 1.8”, 4/3”, 1”, 2/3”, 1/1.8”, 1/2”, 1/2.5”, 1/3” or 1/4” inch CCD or CMOS sensor chips);
- Can be installed in UIS trinocular tube such as: NIKON E100/E200, Ni/Ci series, Eclipse LV100N, 50i/55i/80i/90i series
- Upright: Alphaphot-2, Eclipse series(requires YT-tube), Labophot-2,Optiphot-2, Optiphot 100S/150/200/300;
- Metallurgical: EPIPHOT 300/200;
- Measuring: MM-40/MM-60;
- Inverted: Diaphot 200/300, TS100-F, TE2000；
- Build of material: stainless steel material for the C-Mount end and spray-painted aluminum for the phototube end;
- Telecentric optics with low light deficiency;
- Parfocal with different microscope objective lenses;
- Diffraction limited MTF;
- Aperture totally coupled with UIS microscope objective’s exit pupil;
- The profile of one end of the adapter connecting to the microscope:
